Description
The TIMCO Masonry Hanger range has been designed to support timber joists from a brick or block wall. Install by either building into the wall or for renovation work, rake out existing brickwork. _x000D_
Manufactured from A2 Stainless Steel for ultimate corrosion resistance. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak.
Width mm=100
Height mm=165
Bearing mm=80
Thickness mm=2.4
Joist Size W x H mm=100 x 175
Material=Austenitic Stainless Steel (A2-304)
Type=Welded
CE Marked
Conforms to Eurocode 6 and service class 3
Hangers above 150mm are manufactured 10mm less to allow for notching and regularised timber
