Description
The Teng Tools EVA Tool Kit is supplied in the Teng Tools TCW807N 7 drawer roller cabinet with ball bearing slides. All of the tools are laid out in 2-colour pre-cut EVA foam, which is etched with the size or description of the tool. The top layer of the EVA block is black and the bottom layer is red, which clearly shows if any tools are not in their correct place. Comes with the following: TTEMB11 Pliers Set, 11 Piece: 1 x Heavy-Duty Side Cutters 8in; 1 x High Leverage Combination Pliers 7in; 1 x Long Nose Pliers 8in; 1 x Water Pump Pliers 10in; 4 x Circlip Pliers 7in: Inner Straight, Inner Bent, Outer Straight, Outer Bent; 1 x Long Nose Power Grip Pliers 6in; 2 x Curved Jaw Power Grip Pliers 4in and 10in TTEMD98N Screwdriver Set, 98 Piece: Screwdrivers: 2 x TORX: TX8x75 and TX9x75mm and 5 x TPX: TPX10x100, TPX15x100, TPX20x100, TPX25x100 and TPX30x100mm; Power Thru Screwdrivers: 3 x Slotted: 6.5×100, 8×150 and 10x200mm, and 2 x Phillips: PH2x100 and PH3x150mm; VDE Screwdrivers: 3 x Slotted: 2.5×75, 4×100 and 5.5x125mm, 3 x Phillips: PH0x60, PH1x8 and PH2x100mm, and 1 x Pozi: PZ2x100mm; Mini Screwdrivers: 3 x Slotted: 2.0×40, 2.5×40 and 3.0x40mm, 3 x Phillips: PH00x40, PH0x40 and PH1x40mm and 6 x TORX: TX6, TX7, TX8, TX9, TX10 and TX15. 25mm Screwdriver Bits: 9 x Slotted: 0.6×3.5, 0.6×4.5, 0.8×4.0(x2), 0.8×5.5, 1.0×5.5(x2), 1.2×6.5 and 1.6×8.0mm; 9 x Phillips: PH1(x3), PH2(x3) and PH3(x3); 10 x Pozi: PZ1(x3), PZ2(x3) and PZ3(x4); 14 x TORX: TX6, TX7, TX8, TX10, TX15, TX20(x3), TX25(x3), TX27, TX30 and TX40; 9 x TPX: TPX10, TPX15, TPX20(x2), TPX25(x2), TPX27, TPX30 and TPX40; 6 x Hex: 2, 3, 4, 5, 6 and 8mm; 3 x GR: PH2(x3) and 3 x Robertson: 1, 2 and 3; 1 x Ratcheting Bits Driver with 6 assorted bits; 1 x Magnetiser/Demagnetiser; 1 x 1/4in M:1/4in Hexagon Adaptor; 1 x Coupler Adaptor TTEPS12 General Tools Set, 12 Piece: 1 x Utility Knife with Spare Blades; 1 x Hack Saw 12 Inch; 1 x Engineers Hammer 800g; 1 x Soft Face Hammer; 2 x Cold Chisels: 150×18 and 200x25mm; 1 x Centre Punch 150x5mm; 1 x Parallel Pin Punches Set: 3, 4, 5, 6, 7 and 8mm; 2 x Adjustable Wrenches: 6 and 10in; 1 x 3m Measuring Tape; 1 x Steel Rule 200mm TTESK85 Hex Sockets & Bits Set, 85 Piece: 1/4in Sockets: 3 x Slotted: 4, 5.5 and 7mm, 4 x Phillips: PH0, PH1, PH2 and PH3, 3 x Pozi: PZ1, PZ2 and PZ3, 7 x TORX: TX10, TX15, TX20, TX25, TX27, TX30 and TX40 and 5 x TX-E: E4, E5, E6, E7 and E8; 3/8in Sockets: 9 x TORX: TX10, TX15, TX20, TX25, TX27, TX30, TX40, TX45 and TX50, 5 x TX-E: E10, E12, E14, E16 and E18, 9 x TPX: TPX10, TPX15, TPX20, TPX25, TPX27, TPX30, TPX40, TPX45 and TPX50 and 9 x Hex: 3, 4, 5, 5.5, 6, 7, 8, 10 and 12mm; 1/2in Sockets: 9 x TORX: TX20, TX25, TX27, TX30, TX40, TX45, TX50, TX55 and TX60, 6 x Hex: 5 , 6, 7, 8, 10 and 12mm, 8 x Ribe: 4, 5, 6, 8, 10, 11, 12 and 13 and 7 x XZN: 5, 6, 8, 10, 12, 14 and 16; 1 x 3/8in Extension Bar TTESK77 1/4in, 3/8in & 1/2in Drive Socket Set, 77 Piece: 11 x Regular 1/4in Drive 6-Point Sockets: 4, 5, 5.5, 6, 7, 8, 9, 10, 11, 12 and 13mm; 5 x Deep 1/4in Drive 6-Point Sockets 7, 8, 10, 12 and 13mm; 13 x Regular 3/8in Drive 6-Point Sockets: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 and 22mm; 12 x Regular 1/2in Drive 6-Point Sockets: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 22 and 24mm; 8 x Regular 1/2in Drive 6-Point Impact Sockets: 13, 15, 16, 17, 18, 19, 22 and 24mm; 8 x Deep 1/2in Drive 6-Point Impact Sockets: 13, 15, 16, 17, 18, 19, 22 and 24mm; 1/4in Accessories: 1 x FRP Ratchet, 1 x Spinner Handle 6in, 2 x Extension Bars: 6 and 12 Inch, 1 x Universal Joint, 1 x T-Bar, 1 x T-Bar Handle Adaptor; 3/8in Accessories: 1 x FRP Ratchet, 1 x Wobble Extension Bar 3in, 1 x Extension Bar 6in, 1 x Universal Joint, 1 x 3/8in F:1/4in M Adaptor, 1 x 3/8in F:1/2in M Adaptor, 1 x Rotating Spinner Handle; 1/2in Accessories: 1 x FRP Ratchet, 1 x Wobble Extension Bar 6in, 1 x Extension Bar 10in, 1 x Universal Joint, 1 x 1/2in F:3/8in M Adaptor TTEX17 Hex Key, Inspection & Torque Wrench Kit, 17 Piece: 1 x 1/2in Torque Wrench; 7 x T-Handle Hex Keys: 2.5, 3, 4, 5, 6, 7 and 8mm; 1 x Mixed Fold-Up Key Set: Hex: 4, 5 and 6mm, TORX: TX25 and TX30, Slotted: 5.5mm and Phillips: PH1 and PZ2; x Set of Ball Point Hex Keys: 1.5, 2, 2.5, 3, 4, 5, 6, 8 and 10mm; 1 x Ball Point Hex Key: 7mm; 1 x Set of 9 TORX Keys: TX8, TX9, TX10, TX15, TX20, TX25, TX27, TX30 and TX40; 1 x Magnetic Pick Up; 1 x Magnifying Glass; 1 x Extendable Mirror 57cm; 1 x Pocket LED Torch Hook; 1 x Pick-Up Tool with 4 Heads: Awl, Hook, 45 degree and 90 degree TTEX32 Spanner & File Set, 32 Piece: 19 x Combination Spanners: 8-32mm; 8 x Ratcheting Combination Spanners 8-19mm; 5 x 250mm Files: Flat, Round, Half Round, Three Square and Hand Type Flat
Call Us